Skip to main content

LG Refrigerator Error Codes

Zanussi Refrigerator Error Codes

 Zanussi Refrigerator Error Codes

Zanussi Refrigerator Error Codes

Zanussi Refrigerator Parts
Zanussi Refrigerator Parts

Zanussi Refrigerator Troubleshooting

If the appliance is not working correctly, please carry out the following checks before contacting your local Service Force Centre.

ProblemPossible CauseSolution
No power to the applianceNo power at the socket.Check there is power at the socket.
There is a power cut.Check there is not a power cut by checking the household lights.
The fuse has blown.Check the fuse has not blown.
Thermostat control knob is set at „0”.Check the thermostat setting
The temperature in the fridge or freezer is too highThe appliance is located in an unsuitable position.
Check the ambient temperature is within the appliances operating limits of 10 °C to 32 °C.
The thermostat control knob is set too low.Check that the thermostat control knob is turned to the correct setting relative to ambient conditions.
The compressor runs continuouslyThe thermostat control knob is set at the wrong temperature.Adjust the thermostat control knob.
The door is open.Close the door.
Large quantities of food have been placed in the cabinet.Close the door.
The door has been opened too frequently.Do not leave the door open longer than necessary.
The air ventilation is obstructed.Check that the air ventilation is not obstructed.
The temperature in the fridge or freezer is too lowThe thermostat control knob is set too cold.Set the thermostat control knob to a warmer position.
Excessive frost and ice has built upThe door has been left open.Check the door has not been left open.
Something is obstructing the doorCheck nothing is preventing the door from closing.
The door gasket is dirty.Check the door gasket is intact and clean.
The appliance is noisyThe appliance is not level.Check if the appliance stands stable on the floor.

If after the above checks your appliance still does not operate correctly, contact your local Service Force Centre. Please note that it will be necessary to provide proof of purchase for any in-guarantee service calls.

In the Event of a Power Failure

If there is a power failure during the storage of frozen foods, keep the door closed. If the temperature within your freezer should rise, do not refreeze the food without checking its condition. The following guidelines should assist you:

Ice Cream: Once thawed should be discarded.

Fruits & Vegetables: If soft should be cooked and used up.

Breads & Cakes: Can be refrozen without danger.

Shellfish: Should be refrigerated and used up quickly.

Cooked Dishes: i.e. casseroles should be refrigerated and used up.

Large Pieces of Meat: Can be refrozen providing there are still ice crystals remaining within them.

Small Joints: Should be cooked and can then be refrozen as cooked dishes.

Chicken: Should also be cooked and refrozen as a fresh dish.

Normal Operating Sounds

  • You may hear faint gurgling or bubbling sounds when the refrigerant is pumped through the coils or tubing.
  • When the compressor is on, the refrigerant is being pumped round and you will hear a whirring sound or pulsating noise from the compressor.
  • A thermostat controls the compressor and you will hear a faint ‘click’ when the thermostat cuts in and out.

Zanussi Refrigerator Manual PDF


Popular posts from this blog

Samsung Refrigerator Error Codes

  Samsung Refrigerator Error Codes Samsung Refrigerator Fast Track Troubleshooting: Hold buttons – Freezer, Fridge and Flex Zone for 6 seconds. All on/off LED’s will blink, Stop pressing to view load status. Refer to next. Samsung Refrigerator Display Samsung Refrigerator   Load Mode Part DISPLAY LED Description R-FAN HIGHEST "a" and "b" at the lowest order digit of the R compartment In the case of the R-FAN HIGHEST operation, the corresponding LED is turned on. R-FAN HIGH "a" at the lowest order digit of the R compartment In the case of the R-FAN HIGH operation, the corresponding LED is turned on. R-FAN LOW "b" at the lowest order digit of the R compartment In the case of the R-FAN LOW operation, the corresponding LED is turned on. Overload "e" at the lowest order digit of the R compartment If the external air temperature is 34℃ or higher, the corresponding LED is turned on. Low Temperature "f" at the lowest order digit of th

LG Refrigerator Error Codes

  LG Refrigerator Error Codes Automatic diagnosis makes servicing the refrigerator easy. When a defect occurs, the buttons will not operate; but the tones. such as ding. will sound. When the defect CODE removes the sign, it returns to normal operation (RESET). The defect CODE shows on the Refrigerator and Freezer Display. LG Refrigerator Control Panel Error Codes Problem and Solution Er - FS Item: Failure of freezer sensor. Contents: Cut or short circuit wire. Remarks: Inspect Connecting wires on each sensor. Er - rS Item: Failure of Refrigerator sensor. Contents: Cut or short circuit wire. Remarks: Inspect Connecting wires on each sensor. Er - dS Item: Failure of defrost sensor. Contents: Cut or short circuit wire. Remarks: Inspect Connecting wires on each sensor. Er - rt Item: Failure of Room Temperature sensor. Contents: Cut or short circuit wire. Remarks: Inspect Connecting wires on each sensor. Er - dH Item: Failure of defrost mode. Contents: When defrost sensor doesn’t reach 8°C

Hisense Refrigerator Error Codes

  Hisense Refrigerator Error Codes Code Display Area-Problem E1 Refrigerator temperature display area. Refrigerator sensor malfunctions E3 Freezer temperature display area. Freezer sensor malfunctions. E4 Freezer temperature display area. Defrost sensor malfunctions. E0 Freezer temperature display area. Environment sensor malfunctions. E9 Freezer temperature display area. Ice maker sensor malfunctions. Eb Freezer temperature display area. Ice maker malfunctions. Ec Refrigerator temperature display area. Communication sending malfunctions. Er Refrigerator temperature display area. Communication receiving malfunctions. 88-88 Unplug the refrigerator for 1 minute – plug back in to clear the fault code. Hisense Refrigerator Parts Description The solution for digital display code problem: The testing method of sensor: Using the multimeter with the ohm switch to measure the resistor of sensor, normally at surrounding 25℃ the resistor should be about 2kohm and every with the temperature decrea