Skip to main content

LG Refrigerator Error Codes

Whirlpool Refrigerator Error Codes

 Whirlpool Refrigerator Error Codes

Whirlpool Refrigerator Error Codes

Error CodesProblem
d ErrorAir damper is stuck
C ErrorRefrigerator compartment thermistor failure
18 degrees F ErrorOver temperature condition
CF ErrorCommunication failure between main control board and user interface control
Flashing 6 on the fridge displayAllow fridge to get back to temp on its own
POReplace the control board or power supply board.

Alarm Table:

Alarm type: Door open alarm.

Signal: Refrigerator Light blinks.

Cause: The door has remained open for more than 5 minutes.

Cure: Close the door.

Alarm type: Door open alarm.

Signal: Refrigerator Light OFF.

Cause: The door has remained open for more than 8 minutes.

Cure: Close the door.

Alarm type: Malfunction.

Signal: Any temperature indicators blinks.

Cause: Product malfunction.

Cure: Contact the After-sales Service.

Whirlpool Refrigerator Control Panel
Whirlpool Refrigerator Control Panel

Troubleshooting

What to do if: The appliance is not working.

Possible reasons: There may be an appliance power supply problem.

Solutions:

  • Check if power cable plugged into a live socket with the proper voltage.
  • Check if the protection devices and fuses of the electrical system in your home

What to do if: There is water in the defrost pan

Possible reasons: This is normal in hot, damp weather. The pan can even be half full.

Solutions: Make sure the appliance is level so that the water does not overflow.

What to do if: The light does not work.

Possible reasons: The light may need replacing. The appliance may be in On/ Stand-by model.

Solutions:

  • Make sure if the protection devices and fuses of the electrical system in your home work well.
  • Check if the power cable is plugged into a live socket with the proper voltage
  • In case the LEDs are broken the user must call the Service for exchange of the same type available only at our Aftersales Service Centers or authorized dealers.

What to do if: The motor seems to run too much.

Possible reasons: Motor running time depends on different things: number of door openings, amount of food stored, temperature of the room, setting of the temperature controls.

Solutions:

  • Make sure that the appliance controls are correctly set.
  • Check if there is not a large amount of food been added to the appliance.
  • Check that the door is not opened too often.
  • Check that the door close properly.

What to do if: The appliance temperature is too high.

Possible reasons: There could be various causes (see “Solutions”).

Solutions:

  • Make sure that the condenser (back the appliance) is free of dust and fluff.
  • Make sure that the door properly closed.
  • Make sure that the door seals properly fitted.
  • On hot days or if the room is warm, the motor naturally runs longer.
  • If the appliance door has been left open for a while or if large amounts of food have been stored, the motor will run longer in order to cool down the interior of the appliance.
Whirlpool Refrigerator Product Description
Whirlpool Refrigerator Product Description

What to do if: The doors do not open and close properly.

Possible reasons: There could be various causes (see “Solutions”).

Solutions:

  • Check that food packages are not blocking the door.
  • Check that the internal parts or automatic ice maker are not out of position.
  • Check that the door seals are not dirty or sticky.
  • Ensure the appliance is level.

Whirlpool Refrigerator Manual PDF

Popular posts from this blog

Samsung Refrigerator Error Codes

  Samsung Refrigerator Error Codes Samsung Refrigerator Fast Track Troubleshooting: Hold buttons – Freezer, Fridge and Flex Zone for 6 seconds. All on/off LED’s will blink, Stop pressing to view load status. Refer to next. Samsung Refrigerator Display Samsung Refrigerator   Load Mode Part DISPLAY LED Description R-FAN HIGHEST "a" and "b" at the lowest order digit of the R compartment In the case of the R-FAN HIGHEST operation, the corresponding LED is turned on. R-FAN HIGH "a" at the lowest order digit of the R compartment In the case of the R-FAN HIGH operation, the corresponding LED is turned on. R-FAN LOW "b" at the lowest order digit of the R compartment In the case of the R-FAN LOW operation, the corresponding LED is turned on. Overload "e" at the lowest order digit of the R compartment If the external air temperature is 34℃ or higher, the corresponding LED is turned on. Low Temperature "f" at the lowest order digit of th...
Read more

Miele Refrigerator Error Codes

  Miele Refrigerator Error Codes Repairs should only be carried out by a qualified and trained person in strict accordance with local and national safety regulations. Unauthorized repairs could cause personal injury or machine damage and may void the warranty. Error Codes Problem F0 Fault-in sensor fresh air ''BioFresh'' F1 The sensor of the refrigerating chamber F2 Faulty evaporator sensor F3 Faulty air sensor freezer comparment F4 Indicates a failure in the sensor evaporator F5 Card malfunction microprocessor control 01,_F,21 Ice fault Normal noises: Brrrrr ... A humming noise is made by the motor (compressor). This noise can get louder for brief periods when the motor switches on. Normal noises: Blubb, blubb ... A gurgling noise can be heard when coolant is circulating through the pipes. Normal noises: Click ... Clicking sounds are made when the thermostat switches the motor on and off. Normal noises: Sssrrrrr ... On multi-zone and frost-free appliances you can somet...
Read more

Sharp Refrigerator Error Codes

  Sharp Refrigerator Error Codes Your fridge warns you if the temperatures for cooler and freezer are in improper levels or when a problem occurs in the appliance. Warning codes are displayed in the  Freezer and Cooler  Indicators. Error Codes Problem WHY SR "Failure Warning" There is/are some part(s) Out of order or there is a failure in cooling process LF Freezer comp. Not Cold enough This caution will be seen especially after long term of power failure LC "Refrigerator comp. Not Cold enough" Ideal temperature for Ref. Compartment is +4 o C. If you see this warning your foods have risk of spoiling. LF and LC "not cold enough Warning It is the combination of LF and LC Error type HC Refrigerator comp. too Cold The foods starts to freeze because of the too much cold temperature LOPO "Low voltage Warning" When the power supply gets lower than 170 V the appliance gets to steady position. What To Do? SR Error Code:  Contact the Sharp helpdesk as soon as p...
Read more