Skip to main content

LG Refrigerator Error Codes

Daewoo Refrigerator Error Codes

 Daewoo Refrigerator Error Codes

Error CodesCause
F1F-Sensor Disconnection, Short Circuit. At Temperature Display, a Disconnection is shown as “Lo” , Short Circuit “Hi”.
r1R-Sensor Disconnection, Short Circuit. At Temperature Display, a Disconnection is shown as “Lo” , Short Circuit “Hi”.
rtRT-Sensor Disconnection, Short Circuit. At Temperature Display, a Disconnection is shown as “Lo” , Short Circuit “Hi”.
d1D-Sensor Disconnection, Short Circuit. At Temperature Display, a Disconnection is shown as “Lo” , Short Circuit “Hi”.
HSHumidity Sensor Disconnection, Short Circuit. At Temperature Display, a Disconnection is shown as “Lo” , Short Circuit “Hi”.
drWhen R-Door Open is detected for one hr. or longer
dFWhen F-Door Open is detected for one hr. or longer
dHWhen home-bar Door Open is detected for one hr. or longer
C1When Comp has run 3 hr. or longer as D Sensor detects -5℃ or higher
EPAt a EEPROM Read/Write Error
D2At A/S forced Mode ( ΞΞ d2 displayed)
CEFor the Front, no Data from RX for 30 sec.
cEFor the Main, no Data from RX for 30 sec.
d3At Power consuming forced defrosting
F3When returning from defrosting by the time limit of 50 min. due to D Sensor
EiAt I-Sensor Disconnection / Short Circuit
EgWhen I-Sensor Temperature does not go up to a certain point after a water supply
E1D Sensor Open
E2D Sensor Short
F1F Sensor Open
F2F Sensor Short
F3Defect in defrosting
F4Defect in S/W
F5Defect in compressor

  1. Starting: At a “Locked” state, press “Lock Setup” 5 times while “Freezer” Button is pressed.
  2. Display: The Code for the Error is Displayed using 88 Segment.
  3. Cancellation: Press “Lock Function” once.
  4. Automatic cancellation: In 4 min. after the starting, it is automatically cancelled.
  5. All Error Codes will reset, when it turns to normal state.
  6. Error Code Display

How to Read Sensor Temperature?

How to Read Sensor Temperature
How to Read Sensor Temperature

Start: Press “Freezer” Button at “Locked” state and touch “Lock Setup” Button 5 times.

Cancellation: Touch “Lock Function” Button once Or automatically cancelled 4 min. after starting.

As Error Display Mode starts, the refrigerator operation time is displayed. Following are displayed in that order for every “Freezer” Key pressing.

  1. Refrigerator Operation Time Display
  2. F-Sensor Temperature Display
  3. D-Sensor Temperature Display
  4. R-Sensor Temperature Display
  5. RT (Surrounding Temperature)-Sensor Temperature Display
  6. Water-supplying Time at the Water-supply mode
  7. Humidity Sensor Temperature Display
  8. F1(F-Sensor Disconnection/Short Circuit)
  9. r1 (R-Sensor Disconnection/Short Circuit)
  10. rt (RT-Sensor Disconnection/Short Circuit)
  11. d1 (D-Sensor Disconnection/Short Circuit)
  12. dr (R-Door Switch Bad)
  13. dF (F-Door Switch Bad)
  14. dH (Home bar Door Switch Bad)
  15. C1 (Condenser Cycle Abnormal)
  16. EP (EEPROM Abnormal)
  17. d2 (Ξ Ξ d2 Display, A/S Forced Defrosting Mode Display)
  18. Co (Short Circuit Mode Display)
  19. H5 (Humidity Sensor Disconnection/Short Circuit)

Troubleshooting

Case: Front and side of refrigerator feels warm or hot.

Explanation: Pipes (refrigerant vessel) are placed beneath the surface to prevent moisture forming on it.

Case: Doors do not open easily

Explanation: When you close the door and then open again immediately, the door is not easy to open. Warm air rushes into the inside to create the pressure difference. In this case wait for a minute, then it will open easily.

Case: It sounds like water is flowing from the refrigerator.

Explanation:

  • When the compressor starts to run or stops, refrigerant which makes the inside cold flowing in the pipes can make such a sound.
  • Defrosted water can also make such a sound. (This refrigerator adopts an automatic defrosting system.)

Case: Cracking or clicking sounds

Explanation: Inside parts shrink and/or expand due to temperature change. When the inside gets cold or when the door is open, such sounds can be made.

Case: Humming or buzzing sounds.

Explanation: Compressor or fans for cold air circulation can make such working sound. (If the refrigerator is not level, the sound can be louder.)

Case: Dew or frost on the wall and/or food container surface in the freezer and refrigerator compartment.

Explanation: Frost and/or dew can be made in the following cases;

  • High temperature and/or high humidity around the refrigerator.
  • When doors are open too long.
  • Foods with much moisture are stored uncovered or unwrapped.

Case: Dew on the cabinet surface.

Explanation: If it is highly humid around the refrigerator, moisture in the air sticks to the surface to form dew.

Daewoo Refrigerator Manual PDF

Popular posts from this blog

Samsung Refrigerator Error Codes

  Samsung Refrigerator Error Codes Samsung Refrigerator Fast Track Troubleshooting: Hold buttons – Freezer, Fridge and Flex Zone for 6 seconds. All on/off LED’s will blink, Stop pressing to view load status. Refer to next. Samsung Refrigerator Display Samsung Refrigerator   Load Mode Part DISPLAY LED Description R-FAN HIGHEST "a" and "b" at the lowest order digit of the R compartment In the case of the R-FAN HIGHEST operation, the corresponding LED is turned on. R-FAN HIGH "a" at the lowest order digit of the R compartment In the case of the R-FAN HIGH operation, the corresponding LED is turned on. R-FAN LOW "b" at the lowest order digit of the R compartment In the case of the R-FAN LOW operation, the corresponding LED is turned on. Overload "e" at the lowest order digit of the R compartment If the external air temperature is 34℃ or higher, the corresponding LED is turned on. Low Temperature "f" at the lowest order digit of th

LG Refrigerator Error Codes

  LG Refrigerator Error Codes Automatic diagnosis makes servicing the refrigerator easy. When a defect occurs, the buttons will not operate; but the tones. such as ding. will sound. When the defect CODE removes the sign, it returns to normal operation (RESET). The defect CODE shows on the Refrigerator and Freezer Display. LG Refrigerator Control Panel Error Codes Problem and Solution Er - FS Item: Failure of freezer sensor. Contents: Cut or short circuit wire. Remarks: Inspect Connecting wires on each sensor. Er - rS Item: Failure of Refrigerator sensor. Contents: Cut or short circuit wire. Remarks: Inspect Connecting wires on each sensor. Er - dS Item: Failure of defrost sensor. Contents: Cut or short circuit wire. Remarks: Inspect Connecting wires on each sensor. Er - rt Item: Failure of Room Temperature sensor. Contents: Cut or short circuit wire. Remarks: Inspect Connecting wires on each sensor. Er - dH Item: Failure of defrost mode. Contents: When defrost sensor doesn’t reach 8°C

Hisense Refrigerator Error Codes

  Hisense Refrigerator Error Codes Code Display Area-Problem E1 Refrigerator temperature display area. Refrigerator sensor malfunctions E3 Freezer temperature display area. Freezer sensor malfunctions. E4 Freezer temperature display area. Defrost sensor malfunctions. E0 Freezer temperature display area. Environment sensor malfunctions. E9 Freezer temperature display area. Ice maker sensor malfunctions. Eb Freezer temperature display area. Ice maker malfunctions. Ec Refrigerator temperature display area. Communication sending malfunctions. Er Refrigerator temperature display area. Communication receiving malfunctions. 88-88 Unplug the refrigerator for 1 minute – plug back in to clear the fault code. Hisense Refrigerator Parts Description The solution for digital display code problem: The testing method of sensor: Using the multimeter with the ohm switch to measure the resistor of sensor, normally at surrounding 25℃ the resistor should be about 2kohm and every with the temperature decrea